Phase equilibria in the CaO·SiO2Na2O·SiO2Na2O·Al2O3·6SiO2 system

Equilibrium phase relations in the system CaO·SiO₂Na₂O·SiO₂Na₂O·Al₂O₃·6SiO₂ at 40–80 wt% Na₂O·Al₂O₃·6SiO₂ composition range have been experimentally studied at temperatures between 800 °C and 1200 °C. The liquidus temperature was determined with differential scanning calorimetry. The equilibrated samples were quenched with pressurized nitrogen, and examined with electron probe X-ray microanalysis and X-ray diffraction for identification of microstructure and phase relations. Five primary phase fields, CaO·SiO₂, Na₂O·SiO₂, Na₂O·2CaO·3SiO₂, 2Na₂O·CaO·3SiO₂ and Na₂O·Al₂O₃·6SiO₂ were established. The ternary eutectic point of CaO·SiO₂, Na₂O·2CaO·3SiO₂ and Na₂O·Al₂O₃·6SiO₂ was determined to be at 1030 °C with the composition of 29.0 wt% CaO·SiO₂, 12.0 wt% Na₂O·SiO₂ and 59.0 wt% Na₂O·Al₂O₃·6SiO₂. Peritectic reaction of Na₂O·2CaO·3SiO₂, 2Na₂O·CaO·3SiO₂ and Na₂O·Al₂O₃·6SiO₂ occurred at 930 °C with the composition of 13.0 wt% CaO·SiO₂, 29.0 wt% Na₂O·SiO₂ and 58.0 wt% Na₂O·Al₂O₃·6SiO₂. The liquidus surface projection of the ternary system has been constructed in the composition region important for the bottom ash application.     

一次风风量测控回路的改进方案

在大型火力发电厂一次风风量测控回路中,通过对伯努利低速能量方程的应用和推导,对流体系数的算法进行调整,得出了不同于常规采样截面的测量元件,使用该元件进行差压信号采集,成功通过了流场仿真。最后在回路的控制侧,采用了更加优化的策略,实现了一次风量的协调稳定控制。     

Investigations of environmental stress cracking resistance of HDPE/EVA and LDPE/EVA blends

HDPE/poly(ethylene‐co‐vinylacetate) (EVA) and low‐density polyethylene (LDPE)/EVA blends were tested and compared with respect to their environmental stress cracking resistance (ESCR) using the Bell‐telephone test. The time to failure in the ESCR test improves with increasing EVA content, and considerable improvements were produced for LDPE/EVA blends while small improvements were observed for HDPE/EVA blends. Thermal, rheological, mechanical, and morphological studies were conducted which established a quantitative relationship between morphological features and composition. Furthermore, the failed specimens were further characterized by scanning electron microscopy and fractographic methodology to investigate the failure mechanism for ESCR samples. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39880.     

Structure and mechanical properties of crosslinked glycidyl azide polymers via click chemistry as potential binder of solid propellant

Depending upon the advantages of high efficiency, insensitivity to humidity and so on, the reaction of azide groups in glycidyl azide polymers (GAP) with alkynyl compounds has been used as a substitute of the urethane curing strategy to develop GAP‐based binder for solid propellant. In this work, an alkynyl compound of dimethyl 2,2‐di(prop‐2‐ynyl)malonate (DDPM) reacted with GAP to produce new crosslinked materials under the catalysis of Cu(I)Cl at ambient temperature, and showed great potential as a binder in composite propellant. As the feeding molar ratio of DDPM vs. GAP increased from 1 : 1 to 5 : 1, the crosslinking densities of as‐prepared materials gradually increased, together with simultaneous enhancement of Young's modulus and tensile strength. The breaking elongation showed the maximum value of ca. 82% when the feeding molar ratio of DDPM vs. GAP was 3 : 1. In addition, with an increase of the crosslinking densities, the glass transition temperatures of as‐prepared materials significantly increased from ?43.9°C to ?5.1°C while the mechanical loss peaks also gradually broadened and shifted up to high temperature, and even presented two peaks at the feeding molar ratio of DDPM vs. GAP higher than 4 : 1. It indicated that the formation of triazole‐based network resulted in structural heterogeneity in the as‐prepared materials. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40636.     

Fracture mechanical analysis of two commercial polyoxymethylene homopolymer resins

This research addresses the fracture mechanical analysis of two commercially available polyoxymethylene homopolymer resins. Two types of experiments are used: monotonic fracture toughness tests and cyclic fatigue crack growth tests. The resulting total lifetimes in the fatigue crack growth tests are split up into the appropriate parts of crack growth initiation and fatigue crack propagation. Fracture surfaces of monotonic and cyclic tests are analyzed using light microscopy and scanning electron microscopy. Besides the mechanical tests, the morphology within the used compact tension specimens is examined in detail by using differential scanning calorimetry, small‐ and wide‐angle X‐ray scattering, and polarized light microscopy. The results are analyzed and discussed, considering observations in the previous studies published in the literature. It is shown that both materials can be well analyzed using linear elastic fracture mechanics and their fracture mechanical properties are presented in conjunction with a detailed documentation of the microstructure. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40831.     

Influence of change in ether structure on the low temperature dielectric relaxation of some poly(ether imide)

Broad band dielectric relaxation spectra are reported on a range of polymers created by varying the ether segment in a series of poly(ether imide)s. Changes in the structure allow the effects of steric constraints on the local conformational dynamics of the polymer chain to be explored. These changes have a significant effect on the glass transition temperatures of these polymers which range from 245 to over 420°C. In contrast, the low temperature dielectric relaxation behavior of these polymers is very similar and is attributed to cooperative local oscillatory—librational motions. Changes in the stereochemistry effect the amplitude, activation energy for the relaxation process, the packing chain density, and values of the high frequency limiting permittivity, ε_∞′. This latter parameter is sensitive to the extent of dipole induced dipole and π‐π electron interactions and is influenced by the packing density. The magnitude of ε_∞′ is a very important parameter in determining the suitability of poly(imide)s for electrical applications. The magnitude of ε_∞′ increases with the density; however, deviations from this general trend are observed when large nonpolar groups inhibit the interaction of neighboring chains. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41191.     

Effect of solid‐state shear milling on structure and properties of HDPE/UHMWPE blends

The structure and properties of HDPE/UHMWPE blends prepared through a pan‐milling reactor in solid state at ambient temperature were compared with the blends made by melt mixing. The changes of structure and properties of the blends were investigated by FTIR, melt flow index, mechanical properties, dynamic rheological measurement, DSC, and WAXD. DSC measurement illustrated that after pan‐milling treatment, the half‐width of the melting temperature became smaller. The more content of UHMWPE added in the blend, the more evident change was observed. Combined with the dynamic rheological analysis, it was proved that, the pan‐milling treatment can improve the compatibility of the HDPE/UHMWPE blends. X‐ray diffraction analysis showed that after pan‐milling treatment some ordered structure could be induced, but after heat treatment, the induced crystalline structure disappeared. The tensile properties of pan‐milled HDPE/UHMWPE blends also achieved improvement after pan milling treatment. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39916.     

EDTA and pH‐sensitive crosslinking polymerization of acrylic acid, 2‐acrylamidoglycolic acid,and 2‐acrylamide‐2‐methyl‐1‐propanesulfonic acid

Network formation was monitored by shear storage modulus (G′) during free radical crosslinking polymerization to investigate the effects of pH and ethylenediaminetetraacetic acid (EDTA; a complex agent). Three types of acrylic monomers, acrylic acid (AAc), 2‐acrylamidoglycolic acid (AmGc), and 2‐acrylamido‐2‐methyl propanesulfonic acid (AmPS), were polymerized in the presence of a crosslinking agent. The ratio of crosslinking agent (methylene bis‐acrylamide; MBAAm) to monomer was varied as: 0.583 × 10^?3, 1.169 × 10^?3, 1.753 × 10^?3, and 2.338 × 10^?3. G′ of the hydrogel in crosslinking polymerizations of AAc and AmPS was effectively increased by addition of EDTA, which was not the case for the crosslinking polymerization of AmGc. The order of magnitude of G′ differed based on the acidity of monomer. The maximum values of G′ in crosslinking polymerizations of AAc, AmGc, and AmPS were ～20,000 Pa, 6000 Pa, and 400 Pa, respectively. G′ varied linearly with the molecular weight between crosslinks (M_wc). pH and EDTA‐complex affected the rate of intramolecular propagation during crosslinking polymerization. Our results indicated that G′ was primarily affected by the following factors in the order: (1) acidity of monomer, (2) M_wc, and (3) physical interactions induced by pH and EDTA. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41026.     

Preparation,structure, and properties of end‐functionalized miktoarms star‐shaped polybutadiene–sn–poly(styrene–butadiene) rubber

Two miktoarm star‐shaped rubbers with large‐volume functional groups of 1,1‐diphenylhexyl at the ends of arms (DMS–PB–SBR) and one miktoarm star‐shaped rubber with n‐butyl groups at the ends of arms (BMS–PB–SBR) were prepared by 1,1‐diphenylhexyllithium (DPHLi) and n‐butyl lithium as initiators, respectively. The molecular structures and morphological properties of the three rubbers (MS–PB–SBR) were studied and compared with those acquired from the blend consisting of star‐shaped solution‐polymerized butadiene styrene rubber (S‐SSBR) and butadiene rubber (PBR) prepared by ourselves. The results showed that MS–PB–SBR exhibited a more uniform distribution of PBR phase and a smaller phase size of PBR than that of S‐SSBR/PBR blend. It is found that MS–PB–SBR composites filled with CB showed the lower Payne effect than that of S‐SSBR/PBR/CB composite, suggesting that the MS–PB–SBR/CB composite (particularly the DMS–PB–SBR/CB composites) would possess excellent mechanical properties, high wet‐skid resistance, and low rolling resistance. For the studied MS–PB–SBR systems, the contribution of large‐volume functional groups at the end of PBR molecular chains to decrease the rolling resistance was larger than that of Sn coupling effect. It is envisioned that the miktoarm star‐shaped rubbers with 1,1‐diphenylhexyl groups at the molecular ends would be useful for making treads of green tires. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40002.     

Influences of van der waals volume of substitute groups on CO2 permselectivity of polyimide‐A molecular simulation study

Polyimide (PI) as a typical glassy polymer material was investigated by molecular simulation to reveal the relationship between polymer molecular structure and its gas separation properties. The influences of van der waals volume (V_w) on CO₂ permselectivity of PI polymers (with four kinds of backbone substitute groups and a series of side substitute groups from small to large volume) and V_w was proposed as an intermediate to establish the relationship between the substitute group and permselectivity. The results show that the CO₂ permeability (P) simply increases and CO₂/N₂ selectivity (S) decreases with the increasing V_w of side substitute groups. The linear fitline of P‐V_w is much suitable to describe and predict the effect of the increasing V_w of side substitute group on improving permeability by analyzing the experimental and calculated CO₂ permeability. The increasing V_w of backbone substitute group can slow down the increasing of CO₂ permeability, but result in the decreasing first and then recovering to the original level. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41082.